3P100hp Clockwise 68"

Set of 3 blade propeller Duc-FC Windspoon, Clockwise, Pusher, 68''

Typical applications: Composite aircraft propeller for Rotax 2 stroke engine (503,582,607) on pusher configuration with reduction ratio 3.47 or 4. i.e: Solowings Aquilla, Airborne Trikes, Drifter aircraft, Quicksilver.

Legal Notice: All DUC propellers have a maximum lifetime limited to 600h on direct drive engines (i.e Jabiru, UL Power, Continental, Volkswagen, Limbach) and 800h on Rotax and HKS engines. Structural guarantee is 6 months from date of payment. Average lead time is 2 months from date of payment.

Safety warning-Jabiru engines: Following an accident, the company DUC Helices has sent an email to inform...Read the message

This propeller with its revolutionary shape called WINDSPOON offers unrivalled performance. In the two-bladed or three-bladed version, tractive or pusher, the very special profile of the blade has been calculated to control the air flow over the whole surface of the WINDSPOON. The contrary twist reduces the stress which results in longer blade life.
The results of these developments are:

Better performances
Lower fuel consumption
Less noise

In the INCONEL version, this propeller has the same advantages as the standard version. The INCONEL blade has a very hard Inconel stainless steel insert to protect the leading edge. This propeller is very suited to a hostile environment (sand, gravel, etc....).

Specifications:

For engines up to 100hp
Clockwise
Push configuration
Available with Inconel leading edge
Ground Adjustable Pitch
Diameter 1730mm approx 68"
Weight approx 3.140 Kg (Carbon edge)
Blades Statically Balanced together in factory
Windspoon Design (Patented)

Content:

3 Blades
Forge Carbon Hub: adapted to engine (2 stroke, 4 stroke, Jabiru etc.)
Bolts and Nuts Kit: Adapted to engine

You may need:

Propeller Shaft ø13mm drive lugs (Rotax parts)

You can provide engine's information either with our on-line contact form or in the message field of the checkout page

Information:

Download the installation manual
Read more about the Windspoon model
Find out more about the Cutting-Edge Technology
Use the Torque Converter for the installation

Diameter Converter:
1. Choose the unit to convert from and type the value in the box next to it.
2. The conversion results will immediately appear in all unit boxes.
3. Find the unit to convert to and read the value in the box next to it.
Accepts fractional input (e.g 5 3/8) and does Binary/Octal/Decimal/Hex conversions too

Related Accessories*

*Related accessories are indicative information only. The adequate accessory may vary from one aircraft to another. For accurate advice contact your account manager.